Model
Iveco Eurocargo 180E24S
| Chassis Configuration: | 4x2, RWD |
| Design GVW: | 18,000kg |
| Design GCW: | 21,500kg |
Engine
Iveco Iveco Tector E24
| Fuel type: | Diesel / DERV |
| Cylinders: | 6 |
| Bore/Stroke: | 102 x 120mm |
| Capacity: | 5.9 litres |
| Compression Ratio: | 17.0:1 |
| Maximum net power: | 236hp(176kW) at 2,700rpm |
| Maximum net torque: | 810Nm(597lbft) at 1,250-2,100rpm |
Transmission
Eaton 520B six-speed Synchromesh manual 6-speed Manual
| Ratios: | 6.08, 3.53, 2.09, 1.35, 1.00 and 0.79:1; Reverse, 5.43:1 |
| Final Drive: | Meritor MS13-165 single-reduction hypoid 5.63:1 |
Chassis
Steel ladder frame with front under-run protection
| Braking: | Full air braking system with two independent circuits. Front and rear ventilated discs with automatic adjustment and pad replacement warning. ABS. Air operated spring parking brake. |
| Steering: | Power assisted variable-ratio recirculating ball |
| Suspension: | Front and rear, parabolic springs with anti-roll bars and telescopic shock absorbers |
| Wheels and tyres: | 8.25x22.5in steel wheels with 295/80R22.5 tyres |
| Fuel tank: | 280 litres |
| Axle design weights: | Axle 1: 7,100kg
Axle 2: 11,500kg
|
Dimensions
| Wheelbase: | 6,570mm |
| Cab width: | 2,390mm |
| Cab length: | 2,487mm |
| Front overhang: | 1,352mm |
| Cab floor height: | 1,190mm |
| Loading height: | 1,190mm |
