Model
Iveco Stralis AT 430
| Chassis Configuration: | 6x2, RWD |
| Design GVW: | 22,800kg |
| Design GCW: | 44,000kg |
Engine
Iveco Iveco Cursor 10, Charge-cooled turbo-diesel, Electronically controlled unit injectors, variable geometry turbocharger
| Fuel type: | Diesel / DERV |
| Cylinders: | 6 |
| Bore/Stroke: | 125 x 140mm |
| Capacity: | 10.3 litres |
| Compression Ratio: | 17.0:1 |
| Maximum net power: | 424hp(316kW) at 2,100rpm |
| Maximum net torque: | 1,900Nm(1,401lbft) at 1,050-1,590rpm |
Transmission
Iveco EuroTronic 2 (ZF) AS2301 fully automated 12-speed gearbox -1-speed Automatic
| Ratios: | 15.86, 12.33, 9.57, 7.44, 5.87, 4.57, 3.47, 2.70, 2.10, 1.63, 1.29 and 1.00:1l; reverse, 14.68 and 11.41:1 |
| Final Drive: | Meritor MS13-175 3.08:1 |
Chassis
Steel ladder frame with riveted and bolted construction
| Braking: | Full air braking system with two independent circuits. Ventilated discs with automatic adjustment. ABS, EBS and ASR traction control. Air-operated spring parking brake acting on rear axle. |
| Steering: | Recirculating ball with integral variable ratio hydraulic power assistance |
| Suspension: | Front, parabolic springs; mid and rear, ECAS air with lifting mid axle, anti-roll bar and double-acting shock absorbers front and rear |
| Wheels and tyres: | 8.25x22.5in steel wheels with 315/80R22.5 tyres |
| Fuel tank: | 450 litres |
| Eletrical system: | 24V CAN-bus system |
| Axle design weights: | Axle 1: 7,100kg
Axle 2: 1,500kg
|
Dimensions
| Wheelbase: | 3,800mm |
| Cab width: | 2,550mm |
| Front overhang: | 1,410mm |
| Cab floor height: | 1,360mm |
| Fifth wheel height: | 1,250mm |
