Model
Mitsubishi Canter 35
| Chassis Configuration: | 4x2, RWD |
| Design GVW: | 3,500kg |
Engine
Mitsubishi Motors Direct-injection electronically controlled DOHC turbo-diesel
| Fuel type: | Diesel / DERV |
| Cylinders: | 4 |
| Bore/Stroke: | 95 x 102mm |
| Capacity: | 3.0 litres |
| Compression Ratio: | 19.0:1 |
| Maximum net power: | 123hp(92kW) at 3,200rpm |
Transmission
Five-speed synchromesh overdrive gearbox, provision for PTO 5-speed Manual
| Ratios: | 4.75, 2.69, 1.59, 1.00 and 0.72:1 |
| Final Drive: | 4.44:1 |
Chassis
Ladder frame, hot-rolled channel-section, riveted construction
| Braking: | Dual-circuit hydraulic with vacuum servo assistance, auto adjusting front discs and rear drums, load-sensing valves on rear axle, exhaust-brake |
| Steering: | Power-assisted rack and pinion |
| Suspension: | Semi-elliptic leaf spring, shackle mounted with anti-roll bar and shcok absorbers all round |
| Wheels and tyres: | Steel six-stud wheels with Goodyear Cargo 185/75R16 tyres |
| Fuel tank: | 80 litres |
| Eletrical system: | 12V Earth-Return system |
| Axle design weights: | Axle 1: 1,800kg
Axle 2: 2,500kg
|
| Cab: | single cab |
| Body: | Tipmaster tipper body |
Dimensions
| Wheelbase: | 2,500mm |
| Cab width: | 2,000mm |
| Cab length: | 4,600mm |
| Front overhang: | 1,045mm |
| Cab floor height: | 700mm |
| Loading height: | 700mm |
| Loadspace dimensions: | 3,200mm x 2,000mm x 300mm |
| Loadspace volume: | 8.0m3 |
