A concise history of the diesel engine... And why it's going to be around for some time yet from Volvo Trucks and Biglorryblog

Of course Rudolf Diesel (that's him in all his glory at the very top) could scarcely have been aware of the historic importance of his patent application when he submitted it to Kaiserlichen Patentamt in in February 1892. His application bore the modest title 'Neue, rationelle Wärmekraftmaschine' (That's 'New Efficient Thermal Engine' to you). Yet behind patent number 67207 lay a combustion engine that was far more efficient than any of the steam or gas-powered engines that were common at the end of the 19^th century. And today, says Volvo, "The diesel engine is one of the most exciting and promising technologies in the hunt for new engine solutions for an increasingly eco-aware and resource-efficient world. And the reason for the diesel engine's success? Well says, the Swedish truck maker, "It lies in Rudolf Diesel's original idea: to create an engine with the maximum 'thermodynamic efficiency rating' - something that is achieved when as much as possible of the fuel's energy is used to propel the vehicle, instead of literally 'going up in smoke'. What is special about the diesel engine is that it compresses both air and fuel under immensely high pressure. When the fuel in the cylinder ignites owing to the heat generated by the high degree of compression, this generates the power that sets the piston in motion."

Back in 1897 the first functioning diesel engines boasted an efficiency of just 26%, although that was way beyond the 12% efficiency of steam engines around at the time. [No wonder Edwin Richard Foden decided to back diesels!] Anyway by comparison, today's modern trucks are powered by diesel engines with an efficiency rating of around 46%. "A significant development, to say the least," adds Volvo.

So what exactly has happened in the 112 years since the first functioning diesel engine appeared ? Good question! And according to Maximilian Prager, in combustion engine expert at the Technical University of Munich, "The diesel engine's development can be divided into three stages. The first step was the rapid development of the fuel injection system which took place in the early 1900s. Around 1940 system pressure had increased from 300 bar to more than 700 bar, which meant combustion was both quicker and more efficient. The second step was taken with the development of new air compressors, a component that soon became a problem since compressors at the end of the 1800s were both heavy and large. With the mechanical supercharger, and later the turbine-propelled turbocharger which Volvo Trucks was the first company to introduce in trucks with the unveiling of the TD100 in 1956, air pressure could be doubled from 2 bar to more than 4 bar. This further improved the engine's efficiency."

"The most recent major step came with the development of the electronic common rail injection system at the start of the 1990s. This builds up a kind of pressure reserve that can be used to inject fuel several times per operating cycle. This both raises the power output of the engine and reduces emissions," explains Maximilian to BLB. All these improvements meant that the diesel engine could strengthen its lead over other engine types. Today, a conventional petrol engine, for instance, offers a maximum efficiency rating of about 40% which gives far lower overall efficiency in terms of fuel consumption.

"In terms of the number of litres per kilometre, the diesel engine is about 20 per cent more efficient than a petrol engine," continues Maximilian "For one thing, you can get ten per cent more energy out of a litre of diesel than from a litre of petrol and, for another, the diesel engine operates about ten per cent more efficiently than the petrol engine does."

The diesel engine's high energy efficiency puts it in the lead even when it comes to emissions. However, it was long regarded as 'dirty' since it produced large quantities of visible smoke made up of unburned carbon. Nonetheless, with the development of modern particle filters these emissions have been cut to a minimum. Indeed, with the latest SCR (Selective Catalytic Reduction) technology, emissions of nitrogen oxides have been considerably reduced as well.

Clear-cut examples of how the diesel engine has been improved over the years can be found in Volvo Trucks' engines, says errr... Volvo. "For example, which in the space of just 20 years have become 100 times cleaner in terms of emissions of climate-impacting air pollutants. In parallel, power output has increased by 100 per cent in 35 years. Take the flagship Volvo FH16 with its 700hp engine - the world's strongest truck - which has succeeded in combining performance with environmental consideration in an entirely new way. The truck builds further on SCR technology, but with the help of a range of new technical solutions, including a new oil thermostat, improved exhaust brake, new piston design and a new type of engine oil, it has succeeded in maintaining fuel consumption despite record-breaking power levels.

"By further developing the exhaust brake, which helps reduce the burden on the wheel brakes through electronic control, we have been able to delete a number of moving parts. This all results in better reliability, reduced weight and improved control," explains Henrik Ask, engineer and project manager for the new D16 engine at Volvo Trucks. That's him above.

Through optimised combustion and improved exhaust filtration, the other engines in the latest Volvo Trucks driveline range have also been made both more fuel-efficient and cleaner than ever. For instance, a truck with the best-selling 13-litre engine and Volvo's celebrated I-Shift automated transmission, fuel consumption and carbon dioxide emissions have been cut by up to three per cent in one single move. The new generation of engines meets the EU's new exhaust filtration standards, Euro 5, which will come into force in October this year. Among other things, these standards reduce nitrogen oxide emissions by about 40% compared with the previous Euro 4 standard.

But if all this is already history, what can we say about the diesel engine's future?The next 10 to 15 years will be tough for engine developers as regards the increasingly stringent exhaust emission requirements. However, I believe that for example Volvo Trucks' strategy - focusing on optimising both combustion in the engine and after-treatment of the exhaust gases - is the right way ahead. Focusing solely on combustion with high efficiency at low emissions will be too expensive," says Maximilian Prager.

At the same time, there is immense potential in the new diesel technologies that are currently being developed, he feels. Biofuels can help further cut emissions. And hybrid diesels with single-point technology, where the diesel engine is optimised solely for long-distance operation, for instance, may promote both higher efficiency and lower production costs in the future. "There is immense potential in the diesel engine, primarily for large engines which have to work both hard and long. The diesel engine's high efficiency rating makes it quite simply indispensable in the development of tomorrow's engines," he concludes to which BLB says 'Hear! Hear!!"