In my last blog on the DAF CF cab prompted by 'The Brochure King' Richard Stanier I asked who else m,ight of used it. Well as if you need reminding the Dutch specialist vehicle manufacturer GINAF http://www.ginaf.nl/index.php?id=47&L=1 is one---and along with cabs it uses DAF drivetrain parts too including engines. And here's a YouTube clip on one of their 5-axle rigids in action. Now click through here for more news on who used the DAF CF cabin....
"Thanks for posting up my Raba picture so quickly - and in answer to your question; Yes here's another truck using the CF cab - The MOL Multi Trailer Tractor! Cheers, Rich." And I';ve also learnt from Alberto Milano that: "In Italy the Daf CF cab was utilised by Officine Mirandola for some of its trucks: I remember a 4x2 tractor, some 8x2 units, a 6x4 and an 8x4 tipper." You learn something new every day....
![CAMIR_D_6X4[1].jpg](http://www.roadtransport.com/blogs/big-lorry-blog/CAMIR_D_6X4%5B1%5D.jpg)
Alberto says: "The small italian firm CAMIR utilised the Daf CF cab for some of its heavy trucks as you see here from this 1993 photo about its model R 34 D 6x4, with Daf CF cab and Renault 340 hp engine. Many compliments for your always interesting blog. Alberto." My pleasure and thanks for the photo!"
Having seen the MOL website below, it would appear that the MultiTrailer Tractor now uses an Iveco cab.
http://www.molcy.com/
The same cab was also used on a Titan, (French not German), 8x2 low height machinery transporter which had drive to the first axle ans a very large 'Hiab' type crane behind the cab.
Raba (from Hungary) also used this cab for a short period. (After they used the F2800 cab for years)
Regards,
Arnold